Cangzhou Best Machinery Co., Ltd
Honest is our business way, Innovation is our biggest advantage
Add to Cart
Steel Rain Gutter Roll Forming Machine/Water Gutter Profile Roll Forming Machine
Working flow
Decoiler----feeding----roll forming----cut to length----output table
Machine components
| Name | Qty. |
| Decoiler | 1set |
| Forming machine | 1set |
| Cutting device | 1set |
| Hydraulic pump | 1set |
| Output table | 1set |
Parameter
| 1 | Material width | As your regards |
| 2 | The effective width | As your requests |
| 3 | The thickness of Coil | 0.2—0.8mm |
| 4 | Application | wall sheet and roof sheet |
| 5 | The overall dimensions | 6800mmX1500mmX1300mm |
| 6 | Total weight | 5 Tons |
| 7 | Main Power | 5.5 KW |
| 8 | Uncoiler | Manual Uncoiler |
| 9 | Inner diameter | 508--610mm |
| 10 | Outer diameter | 1200mm |
| 11 | Loading weight | 5T |
| 12 | Forming speed | 10—15m/min |
| 13 | Forming steps | 12 or more stations |
| 14 | Bracket | welded with 36 # I-steel |
| 15 | Material of Shafts | 45# steel with rough finished and then refined finished |
| 16 | Diameter of the Roll | 76mm |
| 17 | Material of Rolls | high quality 45#steel coated with hard chromium 0.05mm |
| 18 | Processing Technology | rough processing ---refined processing--Hard Chromium Plating. |
| 19 | Material of Rack | complete welded structure of A3 steel plate 16mm thickness |
| 20 | Transmission | Transmitted by the chain-bracket |
| 21 | Material of Chain | 45#steel with heat treatment of HRC45-50° |
| 22 | Holders under chain for lubricant | By the machine |
| 23 | Material of cutting blade | Cr12 with quenched treatment 60-62 |
| 24 | Cutting system | Hydraulic cutting |
| 25 | Voltage | 380V/50HZ/3phase or 415v |
Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:3000KG.Inner diameter: 500-508mm
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Hydraulic System AND Computer Control Cabinet
Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC: EURA(Can customize as customer require)
Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
Output Table
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products
RFQ
Step 1: Tell us your requirements
Step 2: Quoataion will be sent based on your requirement. Solution will be recommended to you as the alternative
Step 3: Negotiate and confrim each details for goods, trading terms and so on, get agreement and sign contract.
Step 4: Advanced payment and production
Step 5: Factory Examine Goods/ rectify and reform to meet the requirements of contract.
Step 6: Balance payment and shipping
Step 7: Handing Shipping files to help clients get goods from transporter in time.
Step 8: Clients get goods and go into warranty time.
