Drywall Metal Stud Roll Forming Machine Automatic Cutting 7 Ton With 10 Rollers
General discription
Suitable Material | Q235 or equivalent |
Material Thickness | 0.25-0.8 mm |
Material Width | 914, 1000, 1200, 1220 or 1250, as per the drawing |
Dimension | About 7.9*1.3*1.1m(L*W*H) , as per the drawing |
Working Space | About 17.9*2.8m(L*W) , as per the drawing |
Length of the Sheet | You can set the length according to your need. It is controlled by PLC which can ensure the accuracy of ±1mm. |
Cutting | Automatically stop and cutting when it comes to the set length. |
Discription of the machine
No. | Main parameter of |
1 | Product name | |
2 | Length of the main part | 3300*800*1400mm |
3 | Weight of main part | 3.2 T |
4 | Voltage | 380V-50HZ-3P (as customer’s request) |
5 | Machine structure | Vertical memorial frame |
6 | Frame | Memorial arch frame type |
7 | Frame thickness | 25mm |
8 | Drive mode | By Gear |
9 | Material of rollers | Cr12 |
10 | Material of shafts | 45# steel with tempering |
11 | Diameter of shafts | φ40mm |
12 | Number of rollers | 10 rollers |
13 | Main power | 4kw (Cycloidal planetary gear speed reducer) |
Machine Components and Specifications
3 Ton Electric Uncoiler
- Max.weight: 2TON
- I.D of Coil: 460-560mm
- Steel Plate and C beam welded
- Function: The uncoiler is used to hold and uncoil the coils. This manual uncoil is unpowered. You need to manually adjust the uncoiler mandrel to tension the coil
Feeding and Guiding Device of Stud and Track Machine
- Width Range:200-300mm
- Feeding Type: Manual feeding
- Guiding Type: Manual adjust
- Function of Guiding: Avoid the deviation of the material
Metal Stud and Track Roll Forming Machine
- Machine Structure: The main base use C beam welded, assemble the driven motor inside of the machine, the mill structure use whole plate welded, bottom bearing block assemble in the steel plate directly which is same as Taiwan design
- Forming Speed: 12-15m/min
- Machine Voltage and Frequency:415V, 50Hz, 3Phase
- Material of Rollers: GCR15, CNC processing, HRC58-62, chromed 0.05mm thickness
- Forming Steps:18
- Material of Shaft: ASTM1045, lathe process and polish the out diameter
- Diameter of shaft: 60mm
- Material of Spacers: ASTM1045, wall thickness: 8mm, chromed and hardness treatment.
- Driven Motor: Chinese Guomao Brand, 5.5KW
- Transmission: By gears
- Machine Side Wall Panel:18mm
Hydraulic Cutting Device
- Cutting Type: Hydraulic cutting, roll forming part stop when cutting
- Hydraulic Motor Power:4KW
- Hydraulic Working Pressure: 12-16Mpa
- Material of Cutting Blade: Cr12 with heat treatment
- Length measuring: Automatic encoder(Omron Brand) length measuring
- Tolerance of Length: ±1.0mm
Controlled System for Metal Stud and Track Machine
- Operating System Language: English and Chinese (If you need other language, we will send you the Instructions of English Version, and you please translate the instructions into the language you use. Then we will set the Instructions of your language for you.)
- Voltage and Frequency: 415V, 50Hz, 3Phase
- Control Panel: Touch screen with button-type switch
- Unit of Length: Millimeter (switched on the control panel)
- PLC Brand: Panasonic
- Frequency Converter Brand: Yaskawa
- Encoder Brand: Omron
- Touch Screen Brand: MCSG
- We adopt aviation plug for easy joint the wires by customers.
- You can set the cutting length and quantity on the touch screen. The machine will automatically stop after the completion of the cutting program.